Fishing with Rod Discussion Forum

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Trim tabs on jet boat  (Read 6047 times)

BwiBwi

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1959
Trim tabs on jet boat
« on: November 21, 2010, 12:18:12 PM »

Has any jet boat owner on here experienced porpoising problem with their boat?  Has anyone tried installing trim tabs and did it help?


Thanks.
Logged

camper

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
Re: Trim tabs on jet boat
« Reply #1 on: November 21, 2010, 03:15:20 PM »

Try moving some weight around, what kind of boat is it?
Logged

BwiBwi

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1959
Re: Trim tabs on jet boat
« Reply #2 on: November 21, 2010, 05:31:11 PM »

Thunderjet Alexis Classic 21'

Logged

bentrod

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 996
Re: Trim tabs on jet boat
« Reply #3 on: November 21, 2010, 07:06:57 PM »

sign of under powering issues.  trim tabs can help as can moving weight forward.  Also, when starting out, trim all the way down and gun it.  As you come to plane, you can trim up a bit to get better ride.   
Logged

leaseman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 276
  • on the water or in the bush...thats entertainment
Re: Trim tabs on jet boat
« Reply #4 on: November 22, 2010, 06:11:00 AM »

Too much weight in the back.... let me guess, people sitting in back or on doghouse....... ;D

My TJ does that if people want the wind blowing in their hair! all thw eight at the back and you lonesome up front.... ;)
Logged

Robbie

  • Full Member
  • ***
  • Offline Offline
  • Posts: 82
Re: Trim tabs on jet boat
« Reply #5 on: November 25, 2010, 03:46:38 PM »

It's definitely a weight issue, get more weight forward.  Also the tab at the bottom of your transom could need to be adjusted, if it is angled too high up it will cause a porpoising effect.  I am not recommending this but I have read about brand new boats from the factory needing these adjustments made, and the dealer has told the new owner to use a hammer :o.  How old is the TJ?
Logged

BwiBwi

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1959
Re: Trim tabs on jet boat
« Reply #6 on: November 25, 2010, 08:27:50 PM »

It's a 2005.

I guess first thing to do would be moving the batteries forward.  I have a 9.9 kicker mounted on a fix bracket that's almost as far out as the platform.

Logged

roeman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 378
Re: Trim tabs on jet boat
« Reply #7 on: November 25, 2010, 08:54:15 PM »

My 19' custom weld did that with a kicker on the back, but now with a 21' custom weld I have no problems with a kicker on the back.  It is probably a little heavier then a TJ because it has a fixed frame soft top with sliding windows.. Best advise would be to take off the kicker unless you are going to use it for the day, other wise it is just extra weight..
Logged
Are you fishin or catchin